TeleInspektor®
Autarke Messdatenerfassung mit dauerhaftem Remote Access – integrierter PC, LTE und CAN in einer MessBOX
Remote Access
TeleInspektor® – Compact, Mini & Smart
Automatic data acquisition with remote access in 3 variants
All TeleInspectors have an integrated computer, an LTE and a CAN bus module – for self-sufficient measurement data acquisition and permanent remote access.
- Autonomously operating measurement system – automatic data acquisition
- Full compatibility with MessMAX®
- Independent evaluation of measurement results
- Remote Access über LTE und LAN
- Event-driven sending of measurement data by e-mail possible
Technical Data
| Common Technical Data | |
| Connector | B&K standard Amphenol or as agreed |
| Device supply (optional) | 20…60 V DC |
| CAN connection | Sub-D 9-pin or M12×1 |
| CAN termination resistor | on customer request |
| TeleInspektor® – Compact | |
| Measurement channels | 16 |
| Measurement amplifier | UDSP |
| Measured quantities | Voltage (0…10V DC) / (0…100V DC) |
| Total sample rate | 100 kHz |
| A/D converter resolution | 16 bit |
| Sensor supply | 10V / 24V |
| Device supply | 24V DC |
| CAN bus | 2× galvanically isolated |
| Weight | 2700 g |
| Dimensions | 260×75×250 mm |
| TeleInspektor® – Mini | |
| Measurement channels | 16 |
| Measured quantities | Voltage DC, current, temperature, strain gauge |
| Sample rate | 500 Hz |
| Sensor supply | 10V / 15V / 24V |
| Device supply | 10…30V DC |
| CAN bus | 1× galvanically isolated |
| Weight | 2000 g |
| Dimensions | 320×70×160 mm |
| TeleInspektor® – Smart | |
| Special feature | Ideal for vehicles and systems with CAN |
| Sample rate | 500 Hz |
| Device supply | 10…30V DC |
| CAN bus | 2× galvanically isolated |
| Weight | 1100 g |
| Dimensions | 160×70×160 mm |
High-Dynamic
TeleInspektor® – Multi
Signal conditioning and high-dynamic measurement data acquisition with remote access
Multifunctional for all measurement applications – flexibly equipped with 16 measurement amplifiers. Can also be used as a pure MultiMessBOX.
- Autonomously operating measurement system – automatic data acquisition
- Full compatibility with MessMAX®
- Independent evaluation of measurement results
- Remote Access über LTE und LAN
- Event-driven sending of measurement data by e-mail possible
- Can also be used as a pure MultiMessBOX
Technical Data
| Measurement channels | 16 |
| Measured quantities | Flexible via interchangeable measurement amplifiers |
| Total sample rate | 100 kHz |
| A/D converter resolution | 16 bit |
| Connector | B&K standard Amphenol or as agreed |
| Sensor supply | 5V / 15V / 24V |
| Device supply | 10…30V DC |
| Supply optional | 20…60V DC |
| CAN connection (opt.) | Sub-D 9-pin or M12×1 |
| CAN termination resistor (opt.) | on customer request |
| CAN bus (opt.) | 2× galvanically isolated |
| Weight | 7500 g |
| Dimensions | 445×135×250 mm |