Additional Components
Expansion modules, sensor simulators and accessories for MessBOXes and TeleInspectors
Current Measurement
IH11 A20 / A50
Current measurement – expansion module for MessBOXes and TeleInspectors
For connection to PE or PF module (current adaptation). The IH11 extends MessBOXes and TeleInspectors with precise galvanically isolated current measurement – in two variants for different measurement ranges.
Technical Data
| IH11 A20 | |
| Measurement range | 0 … 0,5 A / 0 … 1 A / 0 … 2 A / 0 … 5 A / 0 … 10 A / 0 … 20 A |
| Isolation voltage | 1000 V |
| Cutoff frequency | 20 kHz |
| Weight | 170 g |
| Dimensions (W×H×D) | 120 × 60 × 65 mm |
| IH11 A50 | |
| Measurement range | 0 … 1 A / 0 … 2,5 A / 0 … 5 A / 0 … 10 A / 0 … 25 A / 0 … 50 A |
| Isolation voltage | 1000 V |
| Cutoff frequency | 20 kHz |
| Weight | 450 g |
| Dimensions (W×H×D) | 150 × 80 × 90 mm |
Voltage Measurement
UG11 A20 / A50
Voltage measurement – expansion module for MessBOXes and TeleInspectors
For connection to PE or PF module (voltage adaptation). The UG11 enables galvanically isolated voltage measurement over a wide range – in two variants for different measurement ranges up to 1000 V.
Technical Data
| UG11 A20 | |
| Measurement range | 0 … 1 V / 0 … 3 V / 0 … 10 V / 0 … 30 V / 0 … 100 V / 0 … 300 V |
| Isolation voltage | 1000 V |
| Cutoff frequency | 20 kHz |
| Weight | 150 g |
| Dimensions (W×H×D) | 130 × 60 × 65 mm |
| UG11 A50 | |
| Measurement range | 0 … 3 V / 0 … 10 V / 0 … 30 V / 0 … 100 V / 0 … 300 V / 0 … 1000 V |
| Isolation voltage | 1000 V |
| Cutoff frequency | 20 kHz |
| Weight | 150 g |
| Dimensions (W×H×D) | 130 × 60 × 65 mm |
Current Measurement
Measurement Shunt
Current measuring resistor – expansion module for MessBOXes and TeleInspectors
For connection to the IS module. The measurement shunt enables precise current measurement via an internal measuring resistor. Special variants up to 200 A available on request.
- Compact metal housing for demanding test bench use
- Max. measuring current 5 A standard – up to 200 A on request
Technical Data
| Resistance | 0,2 Ω ± 0,1 % |
| Max. measuring current | 5 A (up to 200 A on request) |
| Weight | 250 g |
| Dimensions (W×H×D) | 145 × 60 × 80 mm |
Control
ControlBOX
ControlBOX CAN/Analogue – for control of sensors and actuators
Expansion module for MessBOXes with 4 freely programmable analogue outputs. Including MessMAX® device control module. Further variants with 4× analogue current or 4× analogue voltage available.
- 4 freely programmable analogue outputs
- Including MessMAX® device control module
- Variants: 4× voltage output or 4× current output
Technical Data
| Outputs standard | Channel 1/2 = voltage output (0 … ±10 V) / Channel 3/4 = current output (0 … 20 mA) |
| Outputs option 1 | Channel 1/2/3/4 = voltage output (0 … ±10 V) |
| Outputs option 2 | Channel 1/2/3/4 = current output (0 … 20 mA) |
| Weight | 300 g |
| Dimensions (W×H×D) | 130 × 60 × 110 mm |
Digital Acquisition
DG-MessBOX
For acquisition of digital signals
Expansion for TeleInspektor® and MiniMessBOX-USB-UDSP for acquisition of up to 8 digital signals with galvanic isolation between signal and measurement ground.
- Acquisition of up to 8 digital signals
- Dynamic signal acquisition
- Galvanic isolation between signal ground and measurement ground
- BNC or screw terminal connections
Technical Data
| Digital measurement channels | 8 |
| Capturable states | 256 |
| Switching threshold Low | 3 V |
| Switching threshold High | 8 V |
| Permissible signal voltage | 0 … 30 V |
| Output signal | −10 … +10 V |
| Device supply voltage | 10 … 30 V DC |
| Weight | 1000 g |
| Dimensions (W×H×D) | 187 × 75 × 125 mm |
Simulation & Diagnostics
SENSIM Sensor Simulators
Frequency generators, temperature elements, current signal sources and much more.
SENSIM sensor simulators are used for simulation of sensor signals and diagnostics – ideal for commissioning, calibration and test bench development.
- Pt100 simulator
- Measurement bridge simulator
- Frequency generator
- Potentiometer UP01
- Current signal source 20 mA
- DC signal source
Technical Data
| Pt100-Simulator | |
| Adjustment range | −20 … 300 °C |
| Accuracy | 0,2 % |
| Weight | 300 g |
| Dimensions (W×H×D) | 80 × 60 × 145 mm |
| Measurement Bridge Simulator | |
| Adjustment range | 0 … 160 mV/V |
| Accuracy | 0,2 % |
| Weight | 250 g |
| Dimensions (W×H×D) | 80 × 60 × 145 mm |
| Frequency Generator | |
| Adjustment range | 150 Hz … 20 kHz |
| Weight | 300 g |
| Dimensions (W×H×D) | 80 × 60 × 150 mm |
| Potentiometer UP01 | |
| Adjustment range | 0 % … 100 % |
| Weight | 300 g |
| Dimensions (W×H×D) | 80 × 65 × 145 mm |
| Current Signal Source 20 mA | |
| Adjustment range | 0 mA … 20 mA |
| Weight | 300 g |
| Dimensions (W×H×D) | 80 × 60 × 145 mm |
| DC Signal Source | |
| Adjustment range | 0 V … 10 V |
| Weight | 300 g |
| Dimensions (W×H×D) | 80 × 60 × 145 mm |
Power Supply
24V Power Supply
For powering a TeleInspektor
Compact 24V power supply specifically for powering TeleInspectors. With integrated start signal and IEC C20 connector.
Technical Data
| Input | 100 … 240 V AC / 1,5 A / 50 … 60 Hz |
| Output | 24 V DC / 3 A |
| Start signal | Present |
| Input connector | IEC C20 connector |
| Output cable length | 1800 mm |
| Dimensions (W×H×D) | 112 × 49 × 35 mm |
Transport & Protection
Transport Case MultiMessBOX
For safe transport of MultiMessBOXes and accessories
Robust transport case with foam inlay – dustproof, waterproof, alkali and acid resistant. With integrated pressure relief valve and ergonomic handle.
- Dustproof, waterproof, alkali and acid resistant
- Integrated pressure relief valve
- Lockable (lock not included)
- Ergonomic handle & 35 l internal volume
Technical Data
| External dimensions (L×W×H) | 560 × 420 × 210 mm |
| Internal dimensions (L×W×H) | 500 × 350 × 200 mm |
| Internal volume | 35 l |
| Weight | 5300 g |
| Material | Polypropylene |